When your choice is dry spreader or wetting system, RASCO SOLID series spreaders provide the solution. The wide range of options offered by the SOLID series covers all the requirements for accuracy in the spreading work, the use of different materials and the reliability of the spreader. SOLID spreaders are ideal for all types of vehicles, are available with four different types of transmission systems and provide the most efficient solution for defrosting all types of roads even in the most difficult weather conditions.
INQUIRY FORM
SPECIFICATIONS
Model
Bucket capacity of dry material [m³]
Tank capacity of liquid anti-icing material [lit]
Spreading width [m]
Installation
SOLID
0.85 - 12.0
480 - 3.650
1÷6 | 2÷9 | 3÷12
Trucks | Small and big dimension multi purpose vehicle
MAIN TECHNICAL CHARACTERISTICS
DURABILITY
Combination of three systems of surface protection secures a long lifespan of the spreader in the most difficult working conditions.
EASY TO USE
Specially designed for the most difficult spreading materials, with a patented transport system with the lower part closed which prevents the salt from being transported to the floor of the body.
SIMPLICITY OF USE
Includes the use of legs for quick mounting and demounting and a frame which can be adjusted for various mounting methods.
PRECISION
High precision and efficiency of spreading are enabled by the quality of construction of all spreader components and the EPOS control init which enables the control of all spreading parameters directly from the vehicle cabin.
ADVANTAGES
MOUNTING SYSTEM
CONTROL
TRACKING
DRIVE
MOUNTING SYSTEM
The three basic versions of SOLID salt spreaders differ in one key feature – the type of system used to transfer the spreading material to the disc spreader. The choice of transfer systems depends on the type of solution used.
SOLID X
SOLID X is the best choice for spreading materials such as salt, sand or stone grains with low moisture content. The accuracy and efficiency of working with SOLID X is a result of the arithmetic spreading system.
SOLID T
The salt spreader is intended for distribution with dry materials of low or medium humidity. The reliability of the spreader is ensured by the conveyor belt used to supply the material.
SOLID L
This salt spreader is specially designed to work with the most difficult spreading materials, such as wet sand with a high percentage of clay, coarse sea salt or a mixture of different materials. The high reliability and efficiency of the spreading is guaranteed by a strong conveyor chain, which prevents the formation of gaps in the container, regardless of the quality of the spreading materials.
CONTROL
The operation of all RASCO salt spreaders is controlled by the EPOS control modules. Their development by RASCO specialists makes them the leading solution for the control and monitoring of distribution operations. EPOS controls are used to control all parts of the salt spreaders. The control of the spreader hydraulics in combination with the control and feedback system ensures high-precision distribution in all working conditions, while the automated calibration system allows the quick and simple adjustment of the spreading system. The spreading parameters are not lost when the control module is switched off and can be activated automatically the next time the spreading operation starts again.
TRACKING
ARMS is an information and communication system for the control, central monitoring, reporting and optimization of road maintenance activities. Real-time monitoring of working hours of people and machinery as well as resources used (such as salt used, vehicle fuel, etc.) provides the information needed to make immediate and valid decisions to save resources. Unchanged logs protect the user from liability by providing clear information about any action taken, while the reduced consumption of spreading material simultaneously protects the traffic infrastructure and the environment.
DRIVE
It can be done via the vehicle’s hydraulic system or via an independent diesel engine mounted on the spreader frame.
MOUNTING OF SPREADERS ON VEHICLES
RASCO offers a range of options for the mounting of salt spreaders in vehicles from the RO-RO system that allows mounting on the vehicle body, mounting on the chassis or with a lifting system to solutions that turn vehicles into multi-purpose vehicles. Two key features for placing all salt spreaders in vehicles are simplicity and uncompromising safety for users.
MOUNTING ON VEHICLES EQUIPPED WITH HOOK-LIFTS
A specially adjusted spreader frame adables spimple mounting on vehicles equipped with a system for raising devices using a hook.
MOUNTING ON VEHICLES EQUIPPED WITH SKIP LOADER
Simple mounting on vehicles equipped with a container lifting system is enabled by special attachment points on the sides of the spreader.
MOUNTING ON TRAILERS
Spreaders are mounted on tractor or truck trailers, thus becoming independent from the towing vehicle.
MOUNTING ON TIPPER BOX
System for mounting the spreader in a tipper box using RO-RO (Roll-On, Roll-Off) legs and rollers on the device itself is the most common and simplest mounting method. The spreader is easily attached to the tipper box by using tension chains or belts.
MOUNTING ON VEHICLE CHASSIS
Suitable in situations when the vehicle is used exclusively for road maintenance. Different devices, including the spreader, can be easily replaced on the vehicle chassis using specially designed carrying frames.
MAIN TECHNICAL CHARACTERISTICS
ANTI-CORROSIVE PROTECTION
All parts of the salt spreaders which are in constant contact with the salt are made of stainless steel. For the parts to be painted, RASCO uses the Surface Armor system, which provides long-term corrosion protection.
MANAGMENT SYSTEM ARMS
ARMS is an information system for the central monitoring of working hours of people and machines as well as the resources used (salt, vehicle fuel, etc.) in real time to make immediate and valid decisions in order to save resources.
SPREADER OPERATION
It can be done via the vehicle's hydraulic system or via an independent diesel engine mounted on the distributor frame.
OPERATION
The operation of all RASCO salt spreaders is controlled by the EPOS control modules. Their development by RASCO technicians makes them the leading solution for controlling and monitoring distribution operations.
MOUNTING SYSTEM
MOUNTING SYSTEM WITH CHAIN
Specially designed for the most difficult distribution materials, with a patented transport system with the lower part closed which prevents the salt from being transported to the floor of the body.
MOUNTING SYSTEM WITH DOUBLE AUGER
Adding a second bead reduces the vacuum effect in the material bin and allows two different solid dispensers to be dispensed at the same time.
MOUNTING SYSTEM WITH BELT
For the distribution of solid materials with low or moderate humidity levels. The belt has a special design to prevent the vacuum effect in the material bin.
MOUNTING SYSTEM WITH CHAIN
Specially designed for the most difficult distribution materials, with a patented transport system with the lower part closed which prevents the salt from being transported to the floor of the body.
Gallery
